An electromechanical automatic bollard built for precision access control, engineered for durability, safety and performance in any climate.
AE127-600/800 full specifications
Everything from the spec sheet, in one place. The PDF is still under Product Downloads if you need the drawings.
| Impact resistance | |
|---|---|
| Crash rating | Not crash rated |
| Impact resistance (no damage) | 20,000 J |
| Breakout resistance (with damage) | 150,000 J |
| Load rating (EN 124) | D400, drive-over rated when lowered |
| Cylinder | |
| Height above grade | 600 mm (23.6 in) or 800 mm (31.5 in) |
| Diameter | 127 mm (5.0 in) |
| Wall thickness | 4 mm (0.2 in) |
| Material | S235JR steel, or stainless steel AISI 304 |
| Finish | Steel: anti-corrosion treatment plus paint. Stainless: painted or brushed. Standard colour is anthracite grey, any RAL colour on request. |
| Reflective strip | 22 mm (0.9 in), included |
| Operation | |
| Drive | Integrated electromechanical operator |
| Raise speed | 9.5 cm/s (3.7 in/s) for the 600, or 11 cm/s (4.3 in/s) for the 800 |
| Lower speed | 12 cm/s (4.7 in/s) for the 600, or 14 cm/s (5.5 in/s) for the 800 |
| Automatic emergency lowering | Yes, lowers on power failure with emergency batteries included |
| Automatic safety cut-out | Yes, standard |
| Duty rating | Up to 100 cycles per day |
| Service life | 200,000 cycles |
| Power and controls | |
| Control voltage | 230 / 400 V AC (+/- 10%), 50/60 Hz |
| Operator power draw | 140 W (max. 250 W), 0.6 A (max. 1.1 A) |
| Protection class | IP67 |
| Cable to control unit | 10 m (32.8 ft) standard, up to 30 m (98.4 ft) |
| Control panels | Panel for up to 3 bollards, with 2 backup batteries |
| Control box options | Stainless steel ground-mounted box, 330 x 280 x 967 mm (13.0 x 11.0 x 38.1 in), IP40, or fibreglass ground-mounted box, 580 x 330 x 940 mm (22.8 x 13.0 x 37.0 in), IP55 |
| Status feedback option | Bottom magnetic contact for traffic light control and status feedback |
| Foundation | |
| Foundation box depth | 950 mm (37.4 in) for the 600 or 1150 mm (45.3 in) for the 800 |
| Foundation box footprint | 370 x 370 mm (14.6 x 14.6 in) |
| Foundation box options | Aluminium-zinc coated steel box with counterframe and ground anchors |
| Climate | |
| Operating temperature | -40°C to +70°C (-40°F to +158°F) |
| Cold weather | 80 W heating element with transformer and thermostat available |
| Options | |
| Lighting and signals | Lighting point with 1 LED, acoustic warning signal |
| Corrosion | Marine treatment for the cylinder, frame and upper counterframe, for salt and coastal sites |
Need help choosing between the 600 mm and 800 mm heights, or a drawing for your foundation design? Request information above and our team will send what your project needs.



